Laird Controls North America Inc. EPH-15 Manual De Usuario
Page ii ©10/2002, CATTRON-THEIMEG
™
OPERATION & MAINTENANCE INSTRUCTIONS
IMPORTANT NOTICES, continued.
Your Remote Control System may include an optional ‘Reset’ function that must be activated from the
remote controller before motion control outputs are enabled on the controlled machine. You are advised
to review the customized drawing package provided with your Portable Remote Control (PRC) system
to see if this optional safety feature applies to your PRC system.
remote controller before motion control outputs are enabled on the controlled machine. You are advised
to review the customized drawing package provided with your Portable Remote Control (PRC) system
to see if this optional safety feature applies to your PRC system.
Alarm ( )/optional
‘Reset’ ( ) Function
Pushbutton
‘Reset’ ( ) Function
Pushbutton
Controller
PTO Bar
PTO Bar
When this ‘Reset’ function applies to your PRC system, the momentary Alarm/Reset pushbutton located
in the center of the controller’s PTO bar must be depressed immediately after the controller has
completed its Power On Self Test, and before holding the PTO bar down to activate a motion control
function. This will sound the system horn (when connected) and reset the Main Equipment Power
Contactor.
in the center of the controller’s PTO bar must be depressed immediately after the controller has
completed its Power On Self Test, and before holding the PTO bar down to activate a motion control
function. This will sound the system horn (when connected) and reset the Main Equipment Power
Contactor.
This equipment is firmware based, including encoder, decoder, transmitter, and receiver. Any
duplication of operating firmware without written consent of CATTRON-THEIMEG
™
is prohibited.
All firmware, product listings, assembly files, and this manual are protected by U.S. Copyright Laws.
As part of our continuous improvement policy, CATTRON-THEIMEG
As part of our continuous improvement policy, CATTRON-THEIMEG
™
reserves the right to change
specifications without notice.