Williams Sound DLT300 Manual De Usuario

18

1. The Main Speaker will use channel 0; Press the TALK button to activate the microphone
2. Each Interpreter unit will need to be assigned a channel number (1-14). The TALK button must be activated to send the 

interpretation to the attendees.
3. The floor speaks, using a DLT alone (built-in mic) or using it with a compatible headset mic.
4. Interpreter listens directly to the floor, using a DLT alone (built-in speaker) or using it with a compatible headset mic.
5. With the push of a button, interpreter simultaneously interprets to the listeners, using a DLT alone (built-in mic) or using it with a 

compatible headset mic.
6. Each listener hears the interpretation using a DLR 60 2.0.
The Repeater Function can only be used in simultaneous interpretation mode. An additional DLT can be set-up as a repeater to 

increase the range of each channel. See section “Repeater Mode” for details.
The 3.5mm stereo microphone jack can accept a headphone level or a line level output from audio sources when using the 

Williams Sound, LLC WCA 094 attenuated cable.

A261