Broadcast Microwave Services Inc FC-FCII-7 Manual De Usuario
20
Figure 16 Connect the RF Cable to the FCII
Turn the knurled sleeve to tighten
Figure 17 Connect the RF Cable to the RF In
Connector on the FCII-MAX
Turn the knurled sleeve to tighten
Connect the video input to the VIDEO IN connector on the FCII front panel.
Connect the audio input to the AUDIO IN connector on the FCII front panel.
Supply the FCII with power either 28VDC direct to the FCII via the terminal under the ON/OFF switch, or
AC (120 or 240) through the FCII-AC via the AC-INPUT connector on the front panel.
AC (120 or 240) through the FCII-AC via the AC-INPUT connector on the front panel.
Operation
Verify all cable connections are secure.
Turn video source on. FCII will not transmit without a valid video source.
Turn on the FCII-AC power (if applicable).
Turn on the FCII.
Note:
The FCII stores the operating settings upon shut down. When it is restarted, the FCII starts in the same
state it was shut down in. If the FCII was shut down during transmission, it will start in transmission, with
the same settings it had when it was last operated.
state it was shut down in. If the FCII was shut down during transmission, it will start in transmission, with
the same settings it had when it was last operated.
Manually Configure FCII for Broadcast
Select Frequency
Press the any of the menu keys to bring up the frequency menu.
Press OK to enter the menu, use the Ï and Ð buttons to change the value. The Î and Í buttons move
the cursor. Press OK when finished.
the cursor. Press OK when finished.
Select Transmission Power
Use the Ï and Ð buttons to navigate to the RF OUTPUT POWER menu.