Crescend Technologies LLC DSDTV100XX Manual De Usuario

Descargar
Página de 5
 
3
 
5.
  Warning Statements 
 
FCC Part 15.21 Warning Statement- 
NOTE:   THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT 
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS 
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 
 
FCC Part 15.19 Warning Statement- (Required for all Part 15 devices) 
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE 
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT 
MAY CAUSE UNDESIRED OPERATION. 
 
FCC Part 90.203(e) Compliance 
This radio complies with 47 CFR Part 90.203(e) in that the operator cannot program and transmit 
on frequencies, other than those stated by the manufacturer, service or maintenance personnel, 
using the equipment's external operation controls.  It is noted that the FCC rules would be 
violated if this radio is used to operate on frequencies outside of FCC (Part 90 and Part 22) 
Frequency Bands for users other than the (Federal Government). 
 
FCC RF Exposure Requirements 
CAUTION:  This transmitter must be restricted to work related operations in a Controlled RF 
exposure environment. All qualified end-users of this device must have the knowledge to control 
their exposure conditions and/or duration, and the exposure conditions and/or duration of their 
passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and 
requirements. 
Vehicle – Antenna Installation Instructions 
The antenna(s) used for this transmitter must be installed to provide a separation distance of at 
least 1.8m from all persons, must not be co-located or operating in conjunction with any other 
antenna or transmitter, and must not exceed an antenna gain of 0 dBi with a minimum cable loss 
of 1dB. 
The antenna used for this transmitter must be mounted on the center of the roof ONLY and must 
be installed in vehicle having the following characteristics in order to prevent bystanders or 
passengers from being exposed to levels exceeding the limits set for General 
Population/Uncontrolled Exposure environment: