Lectrosonics Inc DBU Manual De Usuario
DBu
LECTROSONICS, INC.
8
Powering On in Operating Mode
Press and hold the Power Button for several seconds
until a counter on the LCD progresses from 1 through 3.
Hold
for
Rf On
...3
DBu
V1.03
V1.03
470.100
-40
-20
+0
DBu
When you release the button, the unit will be operation-
al with the RF output turned on and the Main Window
displayed.
Powering On in Standby Mode
A brief press of the Power Button , releasing it before
the counter has reached 3, will turn the unit on with the
RF output turned off. In this Standby Mode the menus
can be browsed to make settings and adjustments with-
out the risk of interfering with other wireless systems
nearby.
Hold
for
Rf On
...1
Release Power
Button before
the counter
reaches 3 to
enter standby
mode
470.100
-40
-20
+0
DBu
RF indicator blinks
After settings and adjustments are made, press the
power button again to turn the unit off.
NOTE: Also see the section entitled
Power Menu
for the AutoOn feature.
Powering Off
Powering
Off . . .
1
From any screen, power can be
turned off by selecting Pwr Off in the
power menu, holding the Power
Button in and waiting for the
countdown, or with the program-
mable switch (if it is configured for
this function).
If the power button is released, or the top panel switch
is turned back on again before the countdown is com-
pleted, the unit will remain turned on and the LCD will
return to the same screen or menu that was displayed
previously.
NOTE: If the programmable switch is in the OFF
position, power can still be turned on with the
power button. If the programmable switch is then
turned on, a brief message will appear on the LCD.
Power Menu Options
Entering the Power Menu
Press the power button once briefly from any menu
or screen and a menu will appear with several options.
Use the and arrow buttons to highlight menu items.
Then press MENU/SEL to execute the item or enter a
setup screen. The following options are available:
•
Resume - returns to the previous mode and screen
•
Pwr Off - turns the unit off irrevocably
•
Rf On? - enters a screen to enable the operating or
standby modes
•
AutoOn? - allows the unit to automatically turn
back on after a power failure or when fresh batter-
ies are installed (works in the operating mode only)
•
Backlit - adjusts the duration of the LCD back light
to 30 seconds or 5 minutes, or to remain on
•
About - displays model number and firmware
version