GVC Corporation GH2400 Manual De Usuario

•  Make sure CHARGE LED on base is lit when handset is in cradle.

•  If necessary, replace handset battery. (See Handset Battery Charging)

•  Move closer to base and try again.

•  If moving closer doesn’ t work, you may have lost security code. Reset code by placing handset back

  on base for 5-10 seconds. (See Security Code section)

•  Make sure you have selected correct dialing mode, tone or pulse.

•  Make sure AC adaptor is not plugged into wall outlet with other appliances.

Disconnect for 5-10 seconds then reconnect. Place handset back on base and then replug AC adaptor.

•  Make sure handset battery is fully charged.

•  If using a headset(not included), make sure you are using a headset that has a 3/32 inch (2.5mm) plug.

  Make sure the microphone is placed near your mouth.