Sennheiser Electronic Corp ADNWA Manual De Usuario

Preparing the antenna module for operation

ADN-W AM

Connecting the antenna module to the mains power
supply

The antenna module is powered from the ADN CU1 central unit via the
SBC CBL RJ45 system cable.

왘

Connect the hollow jack plug

of the NT 12-50C power supply to

the hollow jack socket

왘

Pass the cable through the cable grip

as shown.

왘

Connect the Euro 8 connector of the mains cable to the socket

the NT 12-50C power supply.

왘

Connect the mains plug of the mains cable to a wall socket.

If the power supplied via the system cable is not sufficient and
if the antenna module is not listed in the central unit‘s oper-
ating menu under “

System Menu

” > “

Versions

” > “

Hardware

Version Info

” or “

Software Version Info

”:

왘

Use the optional NT 12-50C power supply.

CAUTION

Product damage due to an unsuitable power supply!

If you use an unsuitable power supply, this can cause damage to the
ADN-W AM antenna module.

왘

Only connect the NT 12-50C power supply to the antenna module.

Software Version Info

Main menu
System menu

Versions

Hardware Version Info

CU1 SB:

ADN PS:

NT 12-50C