Sennheiser Electronic Corp CBWDYB Manual De Usuario

 

Advanced settings 

 

23 

If you wish to deactivate the adaptive volume adjustment: 

f 

Press and hold down the program button 

 and additionally press the 

base station hook buttonBase station hook button 

. 

The hook LEDHook LED 

 flashes red twice to indicate that the adap-

tive volume adjustment is deactivated. 

If you wish to reactivate the adaptive volume adjustment: 

f 

Press and hold the program button 

 and additionally press the base 

station hook buttonBase station hook button 

. 

The hook LEDHook LED 

 flashes blue twice indicating that the adap-

tive volume adjustment is activated. 

Note: 

If you get out of range of the base station, the adaptive volume ad-
justment is activated! 

Upon delivery, the headset and the base station are already paired , i.e. 
they automatically recognize each other and do not interfere with other 
Bluetooth devices. You do not have to pair them again. 

However, if you have to replace the headset with a new one, e.g. because 
it is damaged, the base station will not recognize the new headset unless 
they are paired as follows: 

f 

Press the program button 

 quickly two times. 

The base station is set to pairing mode. The hook LEDHook LED 

 

flashes blue. 

 

 

 

 

 

f 

Press and hold down for 4 seconds the headset hook buttonHeadset 
hook button 

 and the multi switch 

. 

The headset LEDHeadset LED 

 lights up blue and red and then 

flashes blue to indicate that the headset is in pairing mode. 

Note: 

If pairing is not successful within 60 seconds, the headset returns to 
standby mode. 

The pairing process starts automatically. When pairing has been success-
ful, the blinking stops and the headset LEDHeadset LED 

 and the base 

station hook LED 

 quickly flash blue three times.  

 

 

 

 

 

 

 

4 Sec.