Sennheiser Electronic Corp DMOH1FPXD Manual De Usuario
20
SK 2 bodypack transmitter
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
왘
Open the battery compartment by first sliding the battery
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
왘
Insert the battery as shown. Please observe correct polarity when
inserting the battery.
inserting the battery.
왘
Close the battery compartment.
Note:
When the red LED
goes off during operation, you must replace
the battery as soon as possible.
Operating controls
ON
/
OFF
button
Operation and battery status indication, red LED
쐋
Microphone/instrument input,
3.5 mm jack socket (lockable)
3.5 mm jack socket (lockable)
Antenna (can be screwed off)
Battery compartment cover
MIC
/
INST
slide
switch
Serial number
Channel selector switch
CH
(1 to 4)
Sensitivity control
GAIN
Type plate
Belt clip
freeport.book Seite 20 Mittwoch, 18. Mai 2005 8:35 08