Sennheiser Electronic Corp SDCW9000AP Manual De Usuario
DE
EN
FR
IT
ES
NL
Configuring the conference system
48
WiCOS ehemals SDCw 9000 | Korrekturexemplar 10 | 03.03.09
왘
In the main navigation, click “
Setup
”.
The “
Summary
” overview screen appears.
Setting the network address of the access point – “TCP/IP Settings“
The fixed IP address 192.168.0.10 and the subnet address 255.255.255.0
are factory preset. Using this address, you can access the web server.
are factory preset. Using this address, you can access the web server.
There are two ways to integrate the access point into the network and to
use the web server. You can
use the web server. You can
•
integrate the access point into a network with static IP addresses or
•
integrate the access point into a network with DHCP.
Setting
Function/Meaning
Additional
information
information
“
System Name
“
User selectable name for the network address of the
conference system
conference system
see page 48
“
IP Address
“
IP address of the access point
“
Subnet Mask
“
Subnet address of the address point
“
Address Mode
“
Address mode of the network address
“
Base MAC Address
“
MAC address of the access point
“
Serial Number
“
Serial number of the access point
see page 67
“
Model Name
“
Model name of the access point
“
Hardware Version
“
Version number of the hardware
“
Boot Version
“
Version number of the boot firmware
“
Firmware Version
“
Version number of the firmware
“
FPGA Version
“
Version number of the conference units’ firmware
“
RF Hardware 1 Version
“
Version number of the transmission hardware
“
RF Hardware 2 Version
“
Version number of the reception hardware
“
RF Firmware 1 Version
“
Version number of the transmission firmware
“
RF Firmware 2 Version
“
Version number of the reception firmware