OMG plc VICP1 Manual De Usuario

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

04-Sep-2018

Page 16 of 45

Preparing Origin for a live experience

Before using clusters in a live experience, make the following checks:

1. Ensure clusters are paired with a Beacon in the volume (see 

2. Ensure that the Beacon is enabled. This is shown by the following 

indicators:

• On the System tab, the Connectivity section displays a Beacon entry.

• Beacon connection status is green.

• Beacon error flags are clear.

• On the System tab, select Beacon and then select the Enabled

checkbox. 

(ensure the Enabled checkbox is selected?)

3. Turn on the clusters and check their status in Evoke:

• Cluster entries appear on the System tab, in the Active Cluster

section.

• Cluster connection status is green for all clusters.

• Battery levels are sufficient for the experience.

• Error flags are clear.

• Objects are tracked and labeled in the 3D Scene.

Disable Beacon features (optional):

• Set Pairing Mode to Off

This removes the pairing flag from the Beacon sync broadcast, which 

prevents any unpaired clusters trying to connect to it.

Start camera calibration auto heal session:

• This tells the automatic camera calibration repair mechanism to start 

collecting data.

For successful calibration repair, objects must be tracked in the volume, 

and all cameras must see some data at some point during the session.