Checkpoint Systems Inc. FISOCKS Manual De Usuario

8-8

I L S   O p e n   P l u s   3 . 0   I n s t a l l a t i o n   M a n u a l

To place standard 2” x 2” tags on DiscMate CD (single or double) cases:

If necessary, unlock the case. 

Open and flip the CD case over so that backside of it faces upward.  In this position, the 
CD retaining hub is facing downwards.

Remove the CD from the case’s retaining hub.

Peel the backing off of the tag.

Placement of tag on a CD Case

Lift the clear plastic film away from CD case and slide the tag underneath, into the very 
bottom corner, as close to the edges as possible. Position the dot on the circuit so that it 
points to the center of the case, as seen above.

If desired, affix a library cover-label sticker over the tag. 

 Note 1 When re-inserting CD covers, do not use original artwork that is made of cardboard weight stock. 

The thicker cover may not allow the DiscMate case to slide through the DiscMate opening properly, 

due to the material’s thickness. Original artwork should be scanned or copied onto regular (20 lb.) 

paper stock before putting under the dust jacket. It is okay if part of the RFID circuit extends to the 

center hub of the case.

 Note 2 A cover-label is available that covers both sides of the tag. The cover-label may be printed to give it 

the appearance of a property sticker. Please contact your account representative for more 

information on this product.

Dot

Circuit placed under clear film

Circuit on the outside with case in up position