Mindray DS USA Inc. WT0707-00000 Manual De Usuario

2. Select a non-ECG parameter from the list box, then select the Done button. The 

waveforms in the tab will change to the selected non-ECG parameter. 

3. From the menu bar, select the Print button. The Print Selection dialog is displayed 

4. Select the Print 1 Hour button. The report is sent to the printer.

To print multiple hours of full disclosure data:

1. From the Patient Reports tab, select the Full Disclosure Report button.

2. From the menu bar, select the Print button. The Print Selection dialog is displayed.

3. Select one of the time interval buttons or the Cancel button. 

• The choices are print 1 hour, 2 hours, 4 hours, 8 hours, 12 hours, and 24 hours.

• Select the Cancel button to close the dialog box without generating the print request.

To print multiple hours of full disclosure data (non-ECG layout):

1. From the Disclosure tab, select the Display Choices sidebar button. The Display 

Choices dialog box is displayed. 

2. Select a non-ECG parameter from the list box, then select the Done button. The 

waveforms in the Disclosure tab will change to the selected non-ECG parameter. 

3. From the menu bar, select the Print button. The Print Selection dialog is displayed 

4. Select one of the time interval buttons or the Cancel button. 

• The choices are print 1 hour, 2 hours, 4 hours, 8 hours, 12 hours, and 24 hours.

• Select the Cancel button to close the dialog box without generating the print request.

Requesting either report posts a print job in the system Print Status tab. For additional 
information, refer to the “Print Status Tab” on page 8-38.