Mindray DS USA Inc. WT0707-00000 Manual De Usuario

8.4.2.5

Non-ECG Waveforms

The non-ECG waveforms shown in the Event Zoom In Report are limited to the non-ECG 
waveforms that are in use, and the non-ECG waveforms that are selected to be printed. 

All non-ECG waveforms in the report contain a parameter label and a unit of measure label. 
Non-ECG waveforms in the report may contain a wave gain scale bar. If a non-ECG 
waveform is unavailable at the time of the print request, the report prints blank data for the 
specified time period.

• If the IBP waveform was labeled at the bedside monitor, the report contains that IBP label.

• If the Anesthetic Agent was identified at the bedside monitor, the report contains that 

Agent label.

8.4.2.6

Footer

The Event Zoom In Report contains a footer at the bottom of every page. The footer includes:

• The date and time of the print request. The format displayed is taken from the System 

Date/Time tab.

• A centered page number. 

• The name of the Panorama Central Station where the report was generated. 

8.4.2.7

Printing an Event Zoom In Report

The Event Zoom In Report prints in landscape orientation using the following method:

• From  the  Waveforms View of the Events tab, select the Print menu bar button. 

Requesting this report posts a print job in the system Print Status tab. For additional 
information, refer to the “Print Status Tab” on page 8-38.

8.4.3

Full Disclosure Zoom In Report

The Full Disclosure Zoom In Report (shown in FIGURE 8-28 and FIGURE 8-29) provides 
historical digital and waveform data available for the selected patient tile. The amount of 
disclosure data available for a patient is dependent on the amount of disclosure data 
allowed by the Panorama Central Station license. This report includes a header, digital data, 
waveform data and a footer.