Mindray DS USA Inc. WT0707-00000 Manual De Usuario

• High Limit displays the high limit for the alarm setting. Measurements that exceed this 

setting will trigger an alarm condition. If a high limit is not applicable to the parameter, 
dashes (---) display instead of the high limit.

• Low Limit displays the low limit for the alarm setting. Measurements below this setting 

trigger an alarm condition. If a low limit is not applicable to the parameter, dashes (---) 
display instead of the low limit.

• Priority displays the importance rating for the alarm. The alarm priorities available to 

each parameter may differ.

• Print On Alarm displays whether or not the parameter data should be printed during 

an alarm condition. Print On Alarm settings include ON and OFF.

• Save To Event displays whether or not the parameter data should be saved as an event 

during an alarm condition. Save To Event settings include ON and OFF.

Alarm settings can be customized to a patient using the patient Alarms tabs. 

8.4.8.3

Arrhythmia Settings

The System Alarm Report’s Arrhythmia Settings section includes values for the following:

• Asystole Delay

• V-Tach  Threshold

• All Arrhythmia On/Off

• V-Tach  Rate

• ECG  Noise  Delay

8.4.8.4

Paging Delay Settings

The System Alarm Report’s Paging Delay section includes the system paging delay value that 
was configured in the System Alarms tab. 

8.4.8.5

Footer 

The System Alarm Report contains a footer at the bottom of the report page. The footer 
includes:

• The date and time of the print request. The format displayed is taken from the System 

Date/Time tab. 

• A centered page number. 

• The name of the Panorama Central Station where the report was generated. 

8.4.8.6

Printing a System Alarm Report

The System Alarm Report is printed in portrait orientation. Follow these steps to print this 
report:

1. From the System Alarms tab, select the System Alarm Limits sidebar button.

2. Select the Print menu bar button. The report is sent to the printer.

Requesting this report posts a print job in the system Print Status tab. For additional 
information, refer to the “Print Status Tab” on page 8-38.