Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Patient Reports Tab
Report Functions
8 - 16
0070-10-0690-01
Panorama™ Operating Instructions
• One current and one reference template for the lead being monitored in a 3-lead cable
connection.
• Three current and three reference templates for the leads being monitored in a 5-lead
cable connection.
• Twelve current and twelve reference templates for all of the leads in a 12-lead cable
connection.
Current Templates
The current templates shown in the ST Report are limited to the ECG lead connections
currently in use and the waveforms the patient has selected in the Print Setup tab.
currently in use and the waveforms the patient has selected in the Print Setup tab.
• Current templates in the report contain a label section above the ST data that includes
CUR, the ST lead and the ST measurement.
• Current ST values display in brackets ( [ ] ), if the data represents an alarm condition.
• Current ST values in the report print on a calibrated grid with a scale bar, which
corresponds to the ECG wave gain measurement.
Reference Templates
The reference templates shown in the ST Report are limited to the ECG lead wire set currently
in use and the waveforms selected.
in use and the waveforms selected.
• Reference templates in the report contain a label section above the ST data that includes
REF, the ST lead and the ST measurement.
• Reference ST values display in brackets ( [ ] ), if the data is in an alarm condition.
• Reference ST values in the report print on a calibrated grid with a scale bar, which
corresponds to the ECG wave gain measurement.
8.1.4.3
Footer
The ST Report contains a footer at the bottom of every page. The footer includes:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab.
• A centered page number.
• The name of the Panorama Central Station where the report was generated.
8.1.4.4
Printing an ST Report
The ST Report is printed in landscape orientation, using any of the following methods:
• From the Patient Reports tab, select the ST Report button.
• From the menu bar, select the Print button.
Requesting this report posts a print job in the system Print Status tab. For additional
information, refer to the “Print Status Tab” on page 8-38.
information, refer to the “Print Status Tab” on page 8-38.