Uniden America Corporation UC392 Manual De Usuario
www.uniden.com
Step 2 Install and Charge the Handset Battery
TO INSTALL THE HANDSET BATTERY
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dial mode” on page 14.
network requires pulse dialing, please see
“Choosing the dial mode” on page 14.
A
Remove the cover.
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
Press and hold cid/menu key.
B
Press vol/ring/
or vol/ring/
keys to
move the pointer to an option.
C
Press select to change the option setting.
D
Press end to exit.
D
Plug the AC adapter cord into the base
unit and then into a 120V AC outlet.
unit and then into a 120V AC outlet.
E
Place the handset on the base and charge
continuously for 15 - 20 hours before using
the phone.
continuously for 15 - 20 hours before using
the phone.
B
Connect the battery pack
connector with the
correct polarity.
connector with the
correct polarity.
C
Replace the cover.
redial
pause
select
mem
delete
channel
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
Caller ID on Call Waiting (CIDCW), and Area Code.
Step 3 Connect to Phone Line
Step 4 Setting Display Options
Uniden Parts Department at
(800) 554-3988
Hours: M-F 7:00 a.m. to
5:00 p.m. CST.
We can also be reached on
the web at www.uniden.com
Hours: M-F 7:00 a.m. to
5:00 p.m. CST.
We can also be reached on
the web at www.uniden.com
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Base unit
• Handset
• AC adapter
• Rechargeable battery
• Telephone cord
• Beltclip
• This Owner’s Manual
• Other Printed
Material
Step 1 Checking the Package Contents
QUICK REFERENCE GUIDE
Step 5 Set Answering System
To turn answering system on, press answer on/off.
A pre-recorded greeting will play and your system
is ready to accept calls.
is ready to accept calls.
To record a personal outgoing greeting to callers,
please see page 36.
please see page 36.
[ 3 ]
Q U I C K R E F E R E N C E G U I D E
EXAI398 12/26/2 10:32 AM Page 3