Harman International Industries Inc MICROCORE Manual De Usuario
Micro Series
Micro Series 1-73
Document generated: 04.10.17
SW V1.2
On the Meter tab, the parameters of the mixer internal metering can be set.
1
2
[1]
Headroom
Sets the top, red area of the meter. The default value is 9dB, this means that
meter values above -9dBFS are then displayed in red meter bar elements.
meter values above -9dBFS are then displayed in red meter bar elements.
[2]
Operation Range
This is the mid section of the meter where the signal is displayed in green
meter bar elements.
Meter bar elements below the operation range are yellow.
meter bar elements.
Meter bar elements below the operation range are yellow.
[3] Integration Time
Sets the meters integration time.
None
0 ms
Fast
1 ms
IEC Type I
5 ms
IEC Type II
10 ms