Harman International Industries Inc HOTEL Manual De Usuario

3

Volume Up/Down buttons: Press these buttons to raise and lower the OnBeat Hotel LT’s 

volume. To mute the sound, press both buttons at the same time. (The clock display will 

show “00” for three seconds when the mute is on.) To restore the sound press either 

Volume button.

Power button: When the OnBeat Hotel LT is on, press the Power button to put it into the 

standby mode. (The clock display will dim in the standby mode.) When the OnBeat Hotel LT 

is in standby, press the Power button to turn it on. (The clock display will illuminate at full 

brightness when the unit is on.)

When the OnBeat Hotel LT is in the standby mode it will automatically turn on when it 

detects audio playing from a Bluetooth-connected device, a docked device or when it 

detects wake-up alarm audio from a docked device.

When the OnBeat Hotel LT is on, it will automatically enter the standby mode after 10 

minutes of inactivity (no audio input and no user-control operation).

When the alarm is active, press the Power button to turn the alarm off.

Note: When the OnBeat Hotel LT enters the standby mode it will also bring a docked device 

into standby mode.

Source button: Each press of this button cycles the active source between a paired 

Bluetooth device, a docked device and a device connected to the Audio input. An icon that 

indicates the active source will appear on the display screen.

If you begin to play audio from a docked device while you’re listening to audio on a device 

connected to the Audio input, the OnBeat Hotel LT will automatically switch sources to the 

docked device. If you begin streaming audio from a paired Bluetooth-enabled device while 

you’re listening to any other source, the OnBeat Hotel LT will automatically switch sources 

to the Bluetooth-enabled device.

Display screen: When a device is docked in the OnBeat Hotel LT the Display screen will 

show the current time and an icon indicating the active source.

Snooze button: When you are using the JBL AmpUp App in a docked device, press the 

Snooze button to stop the alarm for a predetermined amount of time. To download the  

JBL AmpUp App go to the Apple App Store.

When the OnBeat Hotel LT is in standby, you can press the Snooze button to turn it on. 

To wirelessly stream audio to the OnBeat Hotel LT from a Bluetooth-enabled device: 

1. Press the OnBeat Hotel LT’s Source button until the Bluetooth icon appears on the 

display. 

2. Place the device in the pairing mode, then hold down the OnBeat Hotel LT’s Source 

button until its Bluetooth icon begins flashing. This will put OnBeat Hotel LT in the 

Bluetooth pairing mode. Use the device’s Bluetooth pairing menu to pair with OnBeat Hotel LT

. (If the device requires a pairing code, it is 

0000.)

3. When OnBeat Hotel LT’s Bluetooth icon illuminates constantly, it is paired with the 

device and you can stream audio via Bluetooth from the device to the OnBeat Hotel LT.

To disconnect the Bluetooth device, press and hold the Source button. To pair OnBeat Hotel LT

 with a different Bluetooth-enabled device, repeat Steps 2 and 3 with the new 

device.