CalAmp 3640HEB Manual De Usuario
9/27/2017
LMU-3640 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/LMU-3640_Hardware_%26_Installation_Guide
23/23
DOCUMENTATION AND/OR RELATED MATERIALS AT ISSUE. SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING PROVISION, WITH RESPECT TO EXCLUDING OR LIMITING
SUCH DAMAGES, MAY NOT APPLY TO YOU.
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING PROVISION, WITH RESPECT TO EXCLUDING OR LIMITING
SUCH DAMAGES, MAY NOT APPLY TO YOU.
Acknowledgement: You acknowledge that you have read this LIMITED WARRANTY, understand it and agree to be bound by its terms and conditions.
You also agree that: (1) No oral or written information or advice given by CalAmp, its dealers, distributors, agents or employees shall in any way
increase the scope of this Limited Warranty and you may not rely on any such information or advice; (2) Unless a written governing agreement signed
by you and CalAmp exists, this License Agreement is the complete and exclusive statement of agreement between CalAmp and you regarding the
licensing of the Software, Documentation and Related Materials and supersedes all proposals, oral or written, and any other communications you may
have had prior to purchasing your license; (3) Except for the price and delivery terms agreed upon by both parties, the terms and conditions of this
License Agreement shall supersede those set forth in any purchase order where the purchase order conflicts or is inconsistent with or adds to the terms
and conditions of this License and those superseded purchase order terms and conditions shall be null and void; (4) You agree to assure that copies of
this License Agreement are distributed, read and agreed to by each Developer using the Software and/or Documentation.
You also agree that: (1) No oral or written information or advice given by CalAmp, its dealers, distributors, agents or employees shall in any way
increase the scope of this Limited Warranty and you may not rely on any such information or advice; (2) Unless a written governing agreement signed
by you and CalAmp exists, this License Agreement is the complete and exclusive statement of agreement between CalAmp and you regarding the
licensing of the Software, Documentation and Related Materials and supersedes all proposals, oral or written, and any other communications you may
have had prior to purchasing your license; (3) Except for the price and delivery terms agreed upon by both parties, the terms and conditions of this
License Agreement shall supersede those set forth in any purchase order where the purchase order conflicts or is inconsistent with or adds to the terms
and conditions of this License and those superseded purchase order terms and conditions shall be null and void; (4) You agree to assure that copies of
this License Agreement are distributed, read and agreed to by each Developer using the Software and/or Documentation.
Governing Law: This Agreement shall be governed by the laws of the State of California, United States, excluding its conflicts of law principles and
excluding the United Nations Convention on Contracts for the International Sale of Goods. You agree to exclusive jurisdiction of California State federal
and state courts, Ventura County, for resolution of any dispute related to this Agreement.
excluding the United Nations Convention on Contracts for the International Sale of Goods. You agree to exclusive jurisdiction of California State federal
and state courts, Ventura County, for resolution of any dispute related to this Agreement.
U.S. Government Protected Rights: The Software Documentation and Related Materials are provided with RESTRICTED RIGHTS. Use, duplication or
disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as
applicable. Manufacturer is CalAmp DataCom Inc., 1401 North Rice Ave. Oxnard, CA 93030. Rights are reserved under copyright laws of the United
States with respect to unpublished portions of the Software.
disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as
applicable. Manufacturer is CalAmp DataCom Inc., 1401 North Rice Ave. Oxnard, CA 93030. Rights are reserved under copyright laws of the United
States with respect to unpublished portions of the Software.
[edit]3 Regulatory Information
Human Exposure Compliance Statement Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications services (PCS)
equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate.
equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate.
CalAmp DataCom Inc. certifies that it has determined that the LMU-3640™ complies with the RF hazard requirements applicable to broadband PCS
equipment operating under the authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This determination is dependent upon
installation, operation and use of the equipment in accordance with all instructions provided.
equipment operating under the authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This determination is dependent upon
installation, operation and use of the equipment in accordance with all instructions provided.
The LMU-3640™ is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device is physically secured at one
location and is not able to be easily moved to another location. “Mobile” means that the device is designed to be used in other than fixed locations and
generally in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s antenna and the body of the user or
nearby persons. The LMU-3640™ is not designed for or intended to be used in mobile applications (within 20 cm of the body of the user) and such uses
are strictly prohibited.
location and is not able to be easily moved to another location. “Mobile” means that the device is designed to be used in other than fixed locations and
generally in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s antenna and the body of the user or
nearby persons. The LMU-3640™ is not designed for or intended to be used in mobile applications (within 20 cm of the body of the user) and such uses
are strictly prohibited.
To ensure that the LMU-3640™ complies with current FCC regulations limiting both maximum RF output power and human exposure to radio
frequency radiation, a separation distance of at least 20 cm must be maintained between the unit’s antenna and the body of the user and any nearby
persons at all times and in all applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed 3.2 dBi.
frequency radiation, a separation distance of at least 20 cm must be maintained between the unit’s antenna and the body of the user and any nearby
persons at all times and in all applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed 3.2 dBi.
FCC Rules and Industry Canada (IC) regulatory information Compliance Statement (Part 15.19) The equipment device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly
approved by TransCore Amtech Systems could void the user’s authority to operate the equipment. Manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Compliance Statement (Part 15.105(b)) Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —
Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies
with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est
conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement. Class B digital device notice “CAN ICES-3 (B)/NMB-3(B)” RF Radiation Exposure Statement
This equipment complies with the FCC/IC radiation exposure limits set fourth for mobile transmitting devices operation in an uncontrolled environment.
End users must follow the specific operating instructions to satisfy RF exposure compliance. The equipment should only be used where there is
normally at least 20cm separation between the antenna and all person/user. This transmitter must not be co-located or operation in conjunction with any
other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly
approved by TransCore Amtech Systems could void the user’s authority to operate the equipment. Manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Compliance Statement (Part 15.105(b)) Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —
Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies
with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est
conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement. Class B digital device notice “CAN ICES-3 (B)/NMB-3(B)” RF Radiation Exposure Statement
This equipment complies with the FCC/IC radiation exposure limits set fourth for mobile transmitting devices operation in an uncontrolled environment.
End users must follow the specific operating instructions to satisfy RF exposure compliance. The equipment should only be used where there is
normally at least 20cm separation between the antenna and all person/user. This transmitter must not be co-located or operation in conjunction with any
other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.