CalAmp 4230HBT Manual De Usuario
1/28/2015
LMU42x0 Hardware & Installation Guide PULS Wiki
https://puls.calamp.com/wiki/LMU42x0_Hardware_%26_Installation_Guide
28/47
4.5 Activating a CDMA LMU42x0™
Check with the CalAmp Sales team for availability of the LMU42x0™ with CDMA modems. For CDMA
devices, the activation sequence you will use varies from carrier to carrier. Each of the supported carriers is
documented below.
devices, the activation sequence you will use varies from carrier to carrier. Each of the supported carriers is
documented below.
To obtain an account, a CDMA carrier will generally ask for three things, the Manufacturer, the Product Type
and the ESN. Obviously the first two items are answered by “CalAmp LMU”. The last one is a little
misleading. The ESN on the LMU is the CalAmp serial number. The one the operator is interested in is the
MSND (which they call the decimal ESN). DO NOT give them the CalAmp ESN (i.e. the top one on the
label). It will only lead to the carrier telling you that the product doesn’t exist and they can’t activate it for you.
and the ESN. Obviously the first two items are answered by “CalAmp LMU”. The last one is a little
misleading. The ESN on the LMU is the CalAmp serial number. The one the operator is interested in is the
MSND (which they call the decimal ESN). DO NOT give them the CalAmp ESN (i.e. the top one on the
label). It will only lead to the carrier telling you that the product doesn’t exist and they can’t activate it for you.
What you should get back will vary from operator to operator; however at very least it will be the MDN
(Mobile Directory Number) and MIN (Mobile Information Number). You should also ask for the SPC (Service
Programming Code) in case it is not 000000. The SPC is effectively a password to the modem which allows
you to program some of the more sensitive items (ex: the MDN and MIN). Please note that the MIN and MSID
can be the same value.
(Mobile Directory Number) and MIN (Mobile Information Number). You should also ask for the SPC (Service
Programming Code) in case it is not 000000. The SPC is effectively a password to the modem which allows
you to program some of the more sensitive items (ex: the MDN and MIN). Please note that the MIN and MSID
can be the same value.
4.5.1 Activating a CDMA LMU42x0™ – Verizon
Verizon supports a system that allows CDMA devices to be provisioned OverTheAir. A CalAmp LMU
42x0™ will automatically use this system to attempt to self provision. This procedure assumes that the LMU
42x0™ has never been provisioned or activated before.
42x0™ will automatically use this system to attempt to self provision. This procedure assumes that the LMU
42x0™ has never been provisioned or activated before.
1. Power on the LMU42x0™, making sure you can observe the behavior of the Comm LED.
2. Wait until the Comm LED turns solid. This could take up to 5 minutes.
3. If after 5 minutes you observe that the Comm LED transitions from a slow blink to a fast blink several
times (i.e. more than twice) you will need to contact Verizon Wireless for further support on account
activation.
2. Wait until the Comm LED turns solid. This could take up to 5 minutes.
3. If after 5 minutes you observe that the Comm LED transitions from a slow blink to a fast blink several
times (i.e. more than twice) you will need to contact Verizon Wireless for further support on account
activation.
Once configured, you may verify that the LMU42x0™’s modem has registered to the CDMA network. Enter:
AT$APP COMM STATUS?
The response should be similar to:
CDMA Service:
IS‐2000
Connection:
Yes
RSSI:
‐80 dBm
Channel:
0
Band:Side:
800:B
Base Station ID: 0
Network ID:
Network ID:
0
System ID:
4
ESN (Modem S/N:
2676319948 [9F8566CC]
Phone Number:
1234567890
IMSI:
310001234567890
CarrierConfig:
5