CalAmp CMM9900 Manual De Usuario
CalAmp
Integration Guide
AMPS
Retrofit
Converter
CMM9900/CMM9920
1/5/2007
---CONFIDENTIAL---
4
RF SAFETY WARNING
- WARNING -
This device and associated antenna must be installed in a location at least
30cm from the body of the user or other nearby persons in order to comply
with the FCC RF exposure guidelines.
30cm from the body of the user or other nearby persons in order to comply
with the FCC RF exposure guidelines.
- NOTICE -
To comply with RF Exposure and FCC Regulations (CFR 47 Parts 22H &
24E) these devices must be used with an approved antenna system. The
total antenna system gain must not exceed that of the original approved
configuration. This transmitter module is restricted to mobile or fixed
installations. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least
24E) these devices must be used with an approved antenna system. The
total antenna system gain must not exceed that of the original approved
configuration. This transmitter module is restricted to mobile or fixed
installations. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least
30 cm from all persons and must
not be co-located or operating in conjunction with any other transmitter.
Portable operation within
Portable operation within
30 cm of a person’s body is not allowed.”
IMPORTANT!!
Performance and compliance with FCC rules are heavily influenced by final
packaging and antenna configuration of the end-product. Installations not
complying with the
packaging and antenna configuration of the end-product. Installations not
complying with the
30cm minimum separation requirement, using
substantially different antenna configurations from those described herein,
or utilizing operating voltages outside of the normal specifications must be
evaluated for compliance with FCC Rules and RF exposure requirements.
Responsibility for compliance of the final product is the responsibility of
the end-product manufacturer.
The CMM9900/9920 may only be used with antennas specifically approved
for use with this product and included in the FCC and PTCRB approvals for
this product.
or utilizing operating voltages outside of the normal specifications must be
evaluated for compliance with FCC Rules and RF exposure requirements.
Responsibility for compliance of the final product is the responsibility of
the end-product manufacturer.
The CMM9900/9920 may only be used with antennas specifically approved
for use with this product and included in the FCC and PTCRB approvals for
this product.
- WARNING -
Use of antenna types other than those included on the CMM9900/9920 FCC
Equipment Authorizations may invalidate the FCC and PTCRB approvals
for this product. See the appendix in the back of this document for a
current list of approved antennas.
Equipment Authorizations may invalidate the FCC and PTCRB approvals
for this product. See the appendix in the back of this document for a
current list of approved antennas.