RELM Communications Inc RPU416B Manual De Usuario

RELM Wireless Corporation

OWNER’S MANUAL

Turn the Channel Selector knob to the “S” position. The transceiver

automatically checks for activity on those channels(1-15) that

have been preprogrammed as scan channels. Your local dealer can

program those channels that are desired to be scanned. If a

conversation is initiated on any of the channels that the transceiver

is scanning, the transceiver will stop on the active channel and you

will be able to hear the conversation.

Any programmed channel may be set as the priority channel. The

transceiver monitors the priority channel while receiving on non-

priority channel. When a signal is received on the priority channel,

the transceiver will automatically stop on the priority channel to

communicate.

When the transceiver is scanning, press the PTT switch, it can

transmit in pre-programmed revert channel.

Revert channel can be programmed by your dealer.

If the channel you choose is set by your dealer as "busy channel

lockout", and this channel is used by other user, pressing PTT

causes the transceiver to generate a beep. The transceiver will not

transmit in this situation. To stop the beep, release PTT.  When

this channel is free, press PTT to transmit.

268ACManual.pm6

01-11-21, 11:06

14