Nokia of America Corporation BBTRX-10A Manual De Usuario

Available models include:
• 9764 Metro Cell Outdoor Wi-Fi AP V1.0 HG (contains High-gain integrated

antennas)

• 9764 Metro Cell Outdoor Wi-Fi AP V1.0 MG (contains Medium-gain integrated

antennas)

The unit is shipped with 3 M3 10mm Torx screws used to secure the 9764 MCO Wi-Fi
AP module to the 9764 MCO.

Connection interfaces

The 9764 MCO Wi-Fi AP module has a single interface connector that plugs into the back
bottom of the 9764 MCO, carrying both power and all communication between the two
components.

This figure reflects the connection point on the back bottom of the 9764 MCO.

Antennas

The 9764 MCO Wi-Fi AP supports 2 integrated antennas optimized for 2x2 MIMO with
up to 2 spatial streams.

Two hardware models are available:
• 9764 MCO Wi-Fi AP V1.0 MG model with Medium-gain integrated antennas.
• 9764 MCO Wi-Fi AP V1.0 HG model with High-gain integrated antennas.

Status indicators

There is an external single bi-color LED (amber/green) on the upper side of the 9764
MCO Wi-Fi AP module housing (pointing up towards the 9764 MCO radome).

Although external, this LED is not easily visible and is not used for post-installation
troubleshooting. During initial cell power-up, however, the installation technician may
observe the LED changes as the unit goes through its booting sequences. Once the cell is
in normal operation for 30 minutes, the LED will turn off automatically.

Figure 2-4 9764 MCO Wi-Fi AP connection point on 9764 MCO

9764 MCO Wi-Fi Access Point

Physical description

....................................................................................................................................................................................................................................

November 2013

Alcatel-Lucent – Internal

Proprietary – Use pursuant to Company instruction

2-7