Nokia of America Corporation BBTRX-10A Manual De Usuario

LED state description - 9764 MCO Wi-Fi AP

Overview

The 9764 MCO Wi-Fi AP module has a single external bi-color LED (red/green) on the
top of the module housing.

The LED illuminates with different colors and blinking patterns during boot-up, then is
automatically turned off after normal operation has been achieved and the timer expires.
If there are problems, then the LED displays the applicable error color/pattern.

Due to limited visibility requiring direct line-of-site between the 9764 MCO Wi-Fi AP
module and the 9764 MCO module, the LED is not intended for ongoing troubleshooting
after the unit has been successfully deployed. However, the field technician
installing/replacing the 9764 MCO Wi-Fi AP module may watch the LED during boot-up
if desired.

LED statuses

The LED reflects 9764 MCO Wi-Fi AP statuses as follows:

Table 3-1

9764 MCO Wi-Fi AP LED description

9764 MCO Wi-Fi AP Status

LED appearance

Booting and self-test

Blink red and green simultaneously at 5Hz

(appears as orange blinking)

Unadopted

Blink red at 5Hz

Normal operation

- 5GHz radio disabled: Blink red at five-second intervals

- 5GHz radio activity: Steady red

- 2.4GHz radio disabled: Blink green at five-second intervals

- 2.4GHz radio activity: Steady green

Firmware update running

Blink green at 5Hz

Timer has expired and unit is
operating normally

No LED lit

Installation of the 9764 MCO Wi-Fi AP

LED state description - 9764 MCO Wi-Fi AP

....................................................................................................................................................................................................................................

November 2013

Alcatel-Lucent – Internal

Proprietary – Use pursuant to Company instruction

3-7