Honeywell International Inc. KSN770 Manual De Usuario

Page 3-133

6 Dec 2012

SYSTEM INSTALLATION MANUAL

066-01204 / 066-01213

© Honeywell International Inc. Do not copy without express permission of Honeywell.

All part numbers and software revisions perform all maintenance functions.

All pins and busses (with the exception of the front USB connector) are for shop maintenance only, and 
must not be included in the aircraft harness.

Information about navigational elements contained on thumb drives is transferred to the KSN 7xx 
data base memory the front USB port. Data base loading need only be performed upon the receipt 
of a new data (available every 28 days from Bendix/King).

The KSN 7xx will not navigate during data loading, and therefore it is necessary to load the data 
base before flight. The thumb drive contains data for airports, VORs, NDBs, published 
Intersections, SID and STAR waypoints, non-precision approach waypoints, and other 
miscellaneous data. The procedure for updating the published data base is detailed in the KSN 7xx 
pilot’s guide.

In addition to loading of the published data base, non-published data base items such as 
user-defined flight plans, waypoints, navaids and airports may be transferred between the KSN 7xx 
and a IBM-compatible personal computer via a thumb drive on the front USB port. The PC software 
kit for this function is available through Bendix King. User data such as user defined flight plans, 
waypoints, navaids, and airports may also be transferred between KSN 7xx systems in dual 
installations through use of the dual system interface. It is not possible to transfer the published 
data base from the KSN 7xx to a thumb drive or from one KSN 7xx to another over the dual system 
interface.

TBD

All pins and busses (with the exception of the front USB connector) are for shop maintenance only, and 
must not be included in the aircraft harness.

Draft as of 10/15/2012