Honeywell International Inc. KXP2290 Manual De Usuario

n

 Rev. 0c, June/2006 Preliminary 05/24/06 10689I00.JA

Page 2-38

(2) 

System Interwiring Check

To check the aircraft and transponder system interconnections proceed as follows:

(a) 

Check that all cables and interwiring are installed in accordance with the In-
terwiring and Cable Harness Fabrication instructions (paragraph

).

(b) 

Using the interconnect diagram (see 

), check wiring for proper destination, opens, and 

shorts.

(c) 

Check rf cables for insertion loss and VSWR.

(3) Visual 

Inspection

In conjunction with system installation, perform the inspection/check procedure (

).

(4) Post-Installation 

Test

Perform the ATC transponder tests and inspections noted in section

(per Federal Aviation Regulation Part 43).