E F Johnson Company 2425M70 Manual De Usuario

7-6

- If your radio or the called radio is inhibited or not programmed to make this type of 

call or for the requested secure mode, “RSPNS ONLY” is displayed and an alert tone 
sounds.

- If your radio does not have the proper encryption key, “KEYFAIL” is displayed and 

the call must be made in the clear mode by pressing the C/S (Clear/Secure) option 
switch (if encryption is selectable on the channel). Otherwise, the correct key must be 
loaded.

4 When the call is finished or is not answered, end it by pressing the CALL option switch 

and placing the microphone back on-hook.

To recall from a list:

1 Momentarily press the Private Call option switch (or select the menu parameter). The 

alias of the last called radio is displayed.

2 To select another mobile, rotate the Select switch until the alias for the desired mobile 

is displayed. 

3 Press the PTT switch to initiate the call.

To make a direct entry using front controls or keypad on the HHC:

1 Press and hold the Private Call option key until a tone sounds (approximately one 

second). The last ID called is displayed.

2 If using the front panel controls, enter the ID of the radio you are calling (five digits for 

Private Call, eight digits for Unit Call) by rotating and pressing the Select switch. A 
single beep sounds when the switch is pressed (if that option is selected). With the 
HHC, enter the number using the DTMF keypad. To cancel the call, press the Private 
Call Option key again.

3 Press the PTT switch to initiate the call. If the entered number is valid, the display 

indicates the alias of the ID if it matches an ID in the call list. Otherwise, the ID you 
entered continues to be displayed.

Events that may then occur are as follows:

- The called party answers the call.

- The called party does not answer. Press the CALL option switch to end the call.

- If the selected mobile ID is not valid, “INVALID ID” is displayed and an alert tone 

sounds.