E F Johnson Company 2425M80 Manual De Usuario
Draft 02 - Sep 1 2015
2-2
Controls & Display
ON-OFF /Volume - Pressing this control turns power ON and OFF (soft power down can
be programmed as in Section 3.1.1.3), and rotating it sets the volume level.
be programmed as in Section 3.1.1.3), and rotating it sets the volume level.
Select Switch - This switch can be pressed or rotated. An optional beep can be
programmed to sound when it is pressed. Selects zones/channels and is also used for other
functions such as selecting names from a call list. When selecting zones/channels, a bar
above the zone or channel display (see Figure 2.3) indicates which is being changed. This
bar is switched between displays by pressing this switch, and zone and channels are
selected by rotating it (see Section 3.1.7.1). If this switch is pressed and held, the radio
enters Menu Mode.
programmed to sound when it is pressed. Selects zones/channels and is also used for other
functions such as selecting names from a call list. When selecting zones/channels, a bar
above the zone or channel display (see Figure 2.3) indicates which is being changed. This
bar is switched between displays by pressing this switch, and zone and channels are
selected by rotating it (see Section 3.1.7.1). If this switch is pressed and held, the radio
enters Menu Mode.
Multi-function Indicator - This is a two-color LED that indicates the following:
Red (constant) - Transmitter keyed in clear mode (PTT switch pressed).
Green (constant) - Busy condition (carrier detected in clear receive mode).
Orange (constant) - Transmitter keyed in encrypted mode (PTT switch pressed)
Red (flashing) - call received in encrypted mode
Green (constant) - Busy condition (carrier detected in clear receive mode).
Orange (constant) - Transmitter keyed in encrypted mode (PTT switch pressed)
Red (flashing) - call received in encrypted mode
Note
This indicator is disabled when the Surveillance mode is programmed (see Section 4.10)
and you can program to disable when the backlight is off.
and you can program to disable when the backlight is off.
Option Buttons - Each of the six options buttons on the front panel (including the one
located to the left of the display) can be programmed by your system operator to control
some function. The button functions can be different for each operating mode
(conventional, SMARTNET/SmartZone, and Project 25 Trunking). Therefore, up to 18
functions can be controlled by these buttons. Refer to Section 4.1 for more information on
option button functions.
located to the left of the display) can be programmed by your system operator to control
some function. The button functions can be different for each operating mode
(conventional, SMARTNET/SmartZone, and Project 25 Trunking). Therefore, up to 18
functions can be controlled by these buttons. Refer to Section 4.1 for more information on
option button functions.
Figure 2.2
Option Buttons
An option button can be programmed as an Emergency button to alert a dispatcher of an
emergency condition. This button can also be programmed for other functions.
emergency condition. This button can also be programmed for other functions.
F2
F3
F4 F5
F6
F1
Programmable Option Buttons