Xiamen Puxing Electronics Science & Technology Co. Ltd. PXDZ558V002 Manual De Usuario

04.CHARGING

04 CHARGING

■

Put the DC plug of the transformer into the DC socket of the charger unit.

■

Connected the supplied transformer to the AC jack

■

Slide the battery or the transceiver with a battery pack into the charger.

■

Make sure the battery pack contacts are in contact with the charging terminals, and the

charger LED is on, it begins to charge.
■

After charging the supplied battery pack for 4 hours, remove it or the transceiver equipped

with it from the

charger. The charger light turns to green automatically after charging is

completed.

CAUTION:

●

It is abnormal in case of the charger glisteningly before sliding the battery pack into the

charger.

●

Don’t replace the battery pack until the indicator light is stable.

●

Make sure contact well, LED indicates red when it is charging, if LED always blinking the

battery pack is damaged or over the environment temperature.

MAINTENANCE 05

Charging Operation

If the transceiver indicator displays

, it means the battery pack is out of power ,

please charge it. Please always use the original charger. The charger’s indicator shows
the charging status below.

Please charge the battery pack as follow:

05.MAINTENANCE

■Don’t carry the transceiver by the antenna or microphone directly.
■Use a soft, clean, dry cloth to clean the transceiver.

■Please cover the speaker/microphone jacks with the supplied cover when the transceiver is

not in used.

■The keypad, knobs and case will become dirty after long use; you can use the soft detergent

and cloth to clean it.