Vertex Standard USA Inc. 11134720 Manual De Usuario
EVX-531 O
pErating
M
anual
8
o
pEratIon
Operation Quick Start
Turn the top panel’s
VOL/PWR knob clock-
wise to turn the radio
on.
on.
Turn the top panel’s CH
Selector knob to choose
the desired operating
channel. The radio an-
nounces the channel
number, if the Channel
Announcement Feature is worked.
the desired operating
channel. The radio an-
nounces the channel
number, if the Channel
Announcement Feature is worked.
If you want to select the operating channel from a
different Channel Group, press (or press and hold)
the Programmable key (assigned to the “g
the Programmable key (assigned to the “g
roup
c
hangE
” function) to change the Channel Group
you want before selecting the operating channel.
Preliminary Steps
Install a charged battery pack onto the transceiver,
as described previously.
Screw the supplied antenna
onto the Antenna jack.
Never attempt to operate
this transceiver without an
antenna connected.
this transceiver without an
antenna connected.
If you have a Speaker/Mi-
crophone, we recommend
that it not be connected un-
til you are familiar with the basic operation of the
EVX-531.
that it not be connected un-
til you are familiar with the basic operation of the
EVX-531.
IMPORTANT NOTE
Water resistance of the transceiver (IP57: 1
meter / 30 minutes) is assured only when the
following conditions:
meter / 30 minutes) is assured only when the
following conditions:
Battery pack is attached to the transceiver;
Antenna is connected to the antenna jack;
and MIC/SP cap is installed in the MIC/
SP jack.