Vertex Standard USA Inc. 11283020 Manual De Usuario

r

 To remove the battery, turn the radio off and remove

any protective cases. Slide the Battery Pack Latch on

the bottom of the radio toward the front panel while

sliding the battery down about 1/2 inch (1.5 cm). Then

lift the battery out from the radio.

r

 To install the battery pack, align the battery pack to the

radio with an offset about 1/2 inch (1.5 cm) from the

top edge of battery compartment, then slide the battery

pack upward until it locks in place with a “Click.”

r

 Remove the Spacer Plate from the nest of the optional

CD-58 Desktop Charger, if the Battery Spacer is in-

stalled.

r

 Insert the DC plug from the optional PA-55 AC

Adapter into the DC jack on the rear panel of the op-

tional CD-58 Desktop Charger, and then connect the

PA-55 AC Adapter to the AC line outlet.

r

 Insert the battery pack into the CD-58 Desktop Char-

ger while aligning the slots of the battery pack with the

guides in the nest of the CD-58; refer to the following

illustration for details on proper positioning of the bat-

Spacer Plate

AC Line Outlet

FCC ID: AXI11283020

IC: 10239A-11283020

Vertex Standard LMR, Inc.