Vertex Standard USA Inc. 11284720 Manual De Usuario

level. Press (or press and

hold) the Programmable

key  again  to  quiet  the

noise and resume normal

(quiet) monitoring.

r

 To transmit, monitor the

channel and make sure it

is clear.

 Press and hold the PTT

switch. Speak into the

microphone area of the

front  panel  grille  in  a

normal voice level. To return to the Receive mode, re-

lease the PTT switch.

r

 Press (or press and hold)

the  SIDE-1 or SIDE-

2 button to activate one

of the pre-programmed

functions  which  may

have been enabled at the

time of programming by

the dealer. See the next chapter for details regarding

feature availability for this radio.

r

 If a Speaker/Microphone

is available, remove the

plastic cap and its two

mounting screws from

the  right  side  of  the

transceiver, then align

the  connector  of  the

Speaker/Microphone on

the radio; secure the con-

nector pin using the screws supplied with the Speaker/

Microphone. Hold the speaker grille up next to your

ear while receiving. To transmit, press the PTT switch

on the Speaker/Microphone, just as you would on the

main transceiver’s body, and speak into the micro-

phone on a normal voice level.

 Note 1): Save the original plastic cap and its mount-

r

 If the BCLO (Busy Channel Lockout) feature has been

programmed on a channel, the radio will not transmit

when a carrier is present. Instead, the radio will gener-

ate short beep three times. Release the PTT switch and

wait for the channel to be clear of activity.

FCC ID: AXI11284720

IC: 10239A-11284720

Vertex Standard LMR, Inc.