Vertex Standard USA Inc. 11284720 Manual De Usuario

ta (t

) s

Press, (or press and hold), the assigned PF key to toggle

the TA Scan feature “On” and “Off”.
While TA Scan is proceeding, the transceiver will search

both the transmit and receive frequencies. When a signal

is encountered on the receive frequency, the transceiver

will pause until the signal disappears. When a signal is

encountered on the transmit frequency, the transceiver

will check for activity on the receive frequency every few

seconds (interval programmed by your Vertex Standard

dealer).
Note: The TA Scan feature does not activate on the Sim-

plex Channel.

Press, (or press and hold), the assigned PF key to activate

the Talk Around feature when you are operating on duplex

channel systems (separate receive and transmit frequen-

cies, utilizing a “repeater” station). The Talk Around

feature allows you to bypass the repeater station and talk

directly to a station that is nearby. This feature has no ef-

fect when you are operating on “simplex” channels, where

the receive and transmit frequencies are already the same.
Note that your dealer may have mode provision for “Talk

Around” channels by programming “repeater” and “Talk

Around” frequencies on two adjacent channels. If so, the

key may be used for one of the other Pre-Programmed

Functions.
Note: The Talk Around feature does not activate on the

Simplex Channel.

Press (or press and hold) the assigned PF key to reset the

RFC (Ready for Communication) condition.

Press, (or press and hold), the assigned PF key to send a

pre-programmed call signal of the 5-Tone.

Your Vertex Standard dealer may have pre-programmed

Auto-Dial telephone number memories into your radio.
To dial a number:

Press, (or press and hold), the assigned PF key to send a

pre-defined DTMF tone. The DTMF tones sent during the

dialing sequence will be heard in the speaker.

Press, (or press and hold), the assigned PF key to send a

pre-programmed 2-Tone encode code or MDC1200

®

en-

code code (ANI encode code).

FCC ID: AXI11284720

IC: 10239A-11284720

Vertex Standard LMR, Inc.