VeriFone MX925INTCTLS Manual De Usuario
DRAFT
MX 900 Series Installation Guide
19
March 1, 2012
Caution:
Improper installation or removal of the terminal connector may
permanently damage the MX 900 Series terminal.
The following precautions must be taken with multiport cables:
■
Use the Ethernet port on the IO module only if the multiport cable is not
attached. Otherwise, use the Ethernet port on the multiport cable.
attached. Otherwise, use the Ethernet port on the multiport cable.
■
Do not force the terminal connector into place.
■
Always make sure that all of the pins are lined up in correct parallel
fashion before applying light pressure to snap the terminal connector into
place.
fashion before applying light pressure to snap the terminal connector into
place.
■
Do not attempt to remove the terminal connector by pulling directly on
the cable. Instead, firmly grasp the sides of the terminal connector with
thumb and forefinger, then pull out at the same angle the connector on
the terminal is facing.
the cable. Instead, firmly grasp the sides of the terminal connector with
thumb and forefinger, then pull out at the same angle the connector on
the terminal is facing.
■
Disconnecting the power source during transaction processing may cause
loss of transaction data.
loss of transaction data.