Nautel Maine Inc VS300 Manual De Usuario
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-97
Setting station ID parameters
In certain applications, the VS300 may be used as a translator to re-broadcast primary information as
a secondary station on an alternate frequency. To allow the secondary station to be identified, you can
set station ID parameters such as call sign, FSK deviation and repeat interval. To view the
a secondary station on an alternate frequency. To allow the secondary station to be identified, you can
set station ID parameters such as call sign, FSK deviation and repeat interval. To view the
Station ID
screen, select
User Settings -> Station ID
from the
Main Menu
(see
Figure 2.88
).
Figure 2.88: Station ID Menu
This menu has four sub-menu options:
•
Call Sign
- sets the station’s call sign letters.
•
FSK ID Enable
- enables (ON) or disables (OFF) the station ID feature.
•
FSK Deviation
- sets the amount of carrier shift from the original carrier frequency. Select a
value between -25 kHz and 25 kHz.
•
Repeat Interval
- determines how often the call sign is broadcast using FSK (recommended
at least once per hour). Select a value between 1 and 60 minutes.
Use the up and down buttons to move the cursor to the desired display setting and then press the
right button to enable editing of the setting.
right button to enable editing of the setting.
Figure 2.89 on page 2-98
shows the editing screens for
the
Station ID
menu. Within any of the editing screens, use the up and down buttons to edit a setting.
In the
Call Sign
editing screen, use the left and right buttons to select a character for editing. Press
the accept (checkmark) button to save the change. Press cancel (
X
) to discard changes and return to
the previous menu.
Note:
Station ID settings are only available using the front panel display.