UTC Fire & Security Americas Corporation Inc 785B-ALGRO Manual De Usuario
24
Allegro
Preliminary 2/5/02
Note
Check marks (
Check marks (
√
) represent characteristics present in a group.
*
This group is not certified as a primary protection circuit for UL-listed systems and is for supplementary use only.
† Sounds instant police siren if two or more sensors are tripped within 4 minutes. Otherwise sensors are followers to delayed
sensors. If Alarm Verification is on, group 18 functions like group 17.
‡ This group has not been investigated by UL.
a
The DTIM will report in all levels.
Siren Type:
Police - A sensor of this type will output a police siren when an alarm occurs. The panel's LCD will display a message indicating
to the end user a police alarm has occurred.
to the end user a police alarm has occurred.
Fire - A sensor of this type will output a fire siren when an alarm occurs.
Silent -If an alarm of this type occurs, the siren will not sound and there will be no visual indication.
Emergency -
Delay:
Instant -A sensor of this type will cause an immediate alarm if a violation occurs anytime in an active arming level.
Standard - A sensor of this type will cause an entry delay if a violation occurs anytime in active arming level. A violation during
an exit delay will not cause an alarm.
an exit delay will not cause an alarm.
If the arming level modifier No Delay is enabled a sensor of this type will cause an immediate alarm if the violation occurs during
an active arming level.
an active arming level.
Follower - A sensor of this type will cause an immediate alarm if a violation occurs during an active level unless an entry or exit
delay is in progress. If violated during an entry delay and the entry delay expires the sensor will go into alarm.
delay is in progress. If violated during an entry delay and the entry delay expires the sensor will go into alarm.
Table B1: Sensor Group Characteristics (Continued)
No.
Name
Application
Alarm
Delay
Resto
ral
S
upe
rv
is
or
y
CS
R
e
p
o
rt
Ch
im
e
Active
Levels
Table B2: System Settings
Menu Name & Default
Parameters
Settings
Account (00-000)
4-10 digits; 0-9, A-F
Number 1 (none)
24 digits; 0-9, *, #, pause
FMT - CID/SIA (CID)
1=CID, 0=SIA
High LVL (on)
off, on
Low LVL (on)
off, on
Openings (off)
off, on
Closings (off)
off, on
Number 2 (none)
24 digits; 0-9, *, #, pause
FMT - (CID)
1=CID, 0=SIA
High LVL (off)
off, on
Low LVL (off)
off, on
Openings (off)
off, on
Closings (off)
off, on
Backup (on)
off, on
Dial DLY (30)
15-120
Pre-dial String (none)
8 digits; 0-9, *, #, pause
DTMF Dial (on)
off, on
Number (none)
24 digits; 0-9, *, #, pause