Bosch Security Systems Inc. M516 Manual De Usuario
BTR-700 Users Manual
Page 2
The BTR-700 has a built-in 100 to 240 VAC 50/60 Hz power supply.
Power is controlled by the ON/OFF front panel switch.
Half (1/2) Wave antennas are supplied with the base station.
These antennas are ground independent.
Transmit (RF) power is switchable on the rear panel from 50mW
(maximum) to 5 mW (minimum). The transmit power can also be turned off
for use where several bases are required that only use one transmit
frequency. The low power setting can be useful where multi-system
intermod could occur or when it is desired to reduce the base transmitter
range.
An Intercom (I/C) termination switch on the rear panel allows selecting
Telex, RTS or ClearCom connections.
The Intercom has XLR and RJ Connectors on the rear panel in order to
“Loop-Thru” to inter-connect several bases together.
The Auxilliary Audio Input and Output connectors are “one way” ports
that are useful for stand-alone applications.
Specifications:
Input Power…………………………………….100-240 VAC, 50-60 Hz.
Transmitter:
Frequency Range…………………..518 to 608 MHz.
( within 3 TV Channels, 18 MHz blocks)
RF Channels, one, frequency agile, 25 KHz steps.
RF Power Output…………………...100 mW Nominal,
Switchable down to 10 mW Nominal.
Frequency Deviation………………..40 KHz Peak.