Bosch Security Systems Inc. M526 Manual De Usuario
Page 1 of 3
Telex Model XO-1 Beltpack
General Description:
The Telex model XO-1 beltpack transceiver
is intended for use as a belt worn wireless
full duplex intercom radio. Multiple XO-1
beltpacks can be used with a XO-AP access
point to communicate with each other over-
the-air.
The XO-1 uses 802.11 technology to receive
/ transmit within one channel of the 1 – 11
(2.412 to 2.462 GHz) channels of the 2.4
GHz ISM band. Its operation is license free.
The transmit and receive antenna are
internal to the beltpack so the unit has a
smaller profile and the antennas are
protected from possible damage.
The XO-1 is powered via an internal Li-Ion
battery that will provide up to 8 hours of run
time at room temperature.
The top panel provides on/off/volume
control, channel select buttons and lights,
talk button and battery status light.
1. On/Off & Volume Control – Turns the beltpack
power on/off and controls headset volume.
2. Battery Light
–
a. GREEN - Battery OK
b. RED - Battery Low (needs charged)
b. RED - Battery Low (needs charged)
3. Offense Button and Light – Selects the
“Offense” intercom channel. The light next to
the button will light when selected.
the button will light when selected.
4. Talk Button – When pressed the microphone
path is enabled.
a. Momentary – Pressed and hold for
over ½ second.
b. Latch on/off – Tap button and the
microphone path is enabled. Tap again
to turn off.
to turn off.
5. Defense Button and Light – Selects the
“Defense” intercom channel. The light next to
the button will light when selected.
the button will light when selected.
1
2
3 4
5
Top View