Ericsson Radio Systems AB PKRC1311004-1 Manual De Usuario
Radio Configurations, RBS 2206
4
Radio Configurations, RBS 2206
This chapter describes the RBS 2206 radio configurations and their
performance.
performance.
All configurations, especially GSM 1900, are not described in this
chapter.
chapter.
4.1
Introduction
4.1.1
Mobile Telephone System
Figure 2
RBS 2000 in the Ericsson GSM system
The Base Station System (BSS) contains two functional entities: the
Base Station Controller (BSC) and the Base Transceiver Station (BTS).
Base Station Controller (BSC) and the Base Transceiver Station (BTS).
The BSC handles radio-related functions, such as handover,
management of the radio network resources, and cell configuration data.
It also controls radio frequency power levels in RBSs and MSs.
management of the radio network resources, and cell configuration data.
It also controls radio frequency power levels in RBSs and MSs.
The BTS is a network component which serves one cell and is
controlled by the BSC. The BTS contains a number of transceivers. It
consists of the radio transceivers and all the digital signal processing
equipment. RBS 2000 contains equipment for 1 - 3 BTSs.
controlled by the BSC. The BTS contains a number of transceivers. It
consists of the radio transceivers and all the digital signal processing
equipment. RBS 2000 contains equipment for 1 - 3 BTSs.
EN/LZT 720 0008
R1A
2001-06-26
31 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —