Ericsson Radio Systems AB PKRC1311004-1 Manual De Usuario
Radio Configurations, RBS 2206
Table 20
1 x 8 configurations with CDU-G
CDU
TMA
Antenna
No. / Connector
No. (TMA config.
only)
Cell 1
1 / TX / RX1
1
TX / RXA
1 / TX / RX1
3
TX / RXB
Alt. cell 1
3 / TX / RX1
3
TX / RXA
3 / TX / RX1
5
TX / RXB
Note:
It is only possible to have one 1 x 8 configuration in the
cabinet. One 1 x 8 configuration can be combined with one
1 x 4 configuration.
cabinet. One 1 x 8 configuration can be combined with one
1 x 4 configuration.
4.7
Site Cell Configurations
The following section shows site cell configurations in one RBS. More
RBSs can be combined to form larger configurations at a site. Possible
expansions, where different RBSs are connected using TG-
synchronization, are described in Section 4.8 Co-Siting with RBS 200 or
RBS 2000 Macro Cabinet on page 74.
RBSs can be combined to form larger configurations at a site. Possible
expansions, where different RBSs are connected using TG-
synchronization, are described in Section 4.8 Co-Siting with RBS 200 or
RBS 2000 Macro Cabinet on page 74.
The following SCCs are supported by the RBS:
•
specified basic radio configurations
•
the RBS with any number of dTRUs within the specified range
inserted in the specified position order.
inserted in the specified position order.
EN/LZT 720 0008
R1A
2001-06-26
67 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —