ACR Electronics ACR-AIS-300 Manual De Usuario

 

 

10 of 25 

Y1-03-0222 Rev T4T4  

 

2.2.9 

Enter the vessels information in the appropriate box: 

•  Ship's name - enter the name of the vessel (20 characters maximum) 

•  Call Sign - enter the vessel's radio call sign (7 characters maximum) 

•  MMSI number  - enter the vessel's Maritime Mobile Service Identity number 

•  Enter the vessels dimensions as follows 

o

  Dimension A  - distance from bows to GPS antenna location to the nearest meter 

o

  Dimension B - distance from the GPS antenna location to the stern to the nearest 

meter 

o

  Dimension C - distance from the port side to the GPS antenna location to the 

nearest meter 

o

  Dimension D - distance from the GPS antenna to the starboard side to the nearest 

meter 

•  Select the most appropriate vessel type from the drop down menu. 

L

2.2.10  When you have entered all of the vessel's data click the 'Save static data to AIS' button to 
 

program this configuration into the AIS transponder: 

 

 

 

 

2.2.11  A warning will be displayed asking you to verify the MMSI number.  The MMSI can only be 

 

 

changed by your dealer once programmed into the transponder.  You can change all data 

 

 

(except the MMSI) at any time, should the need arise.  Please check that the number displayed 

 

 

is correct before proceeding. If the number is incorrect click the 'No' button to cancel  

 

 

programming of the MMSI: 

 

 

 

2.2.12  Click the 'Yes' button if the MMSI is correct 

 

 

 

2.2.13  The static data tab will be updated to show the newly programmed vessel information. The 

 

 

MMSI number will be displayed with a grey background to indicate that it has been programmed 

 

 

and cannot be changed. 

 
 

For additional Software applications unrelated to the installation, please refer to the Link2AIS manual for 

 technical 

support.