Cobra Electronics Corporation 0102A Manual De Usuario

1.  Plug the power adapter plug (1) into the power port of the PhoneLynx (2).

2.  Plug the power adapter cord into a 110/120-volt household wall outlet.

3.  Plug the phone line (3) coming from the phone, not from the wall jack, into the 

transmitter.

⁄

 Never connect the PhoneLynx to the telephone company land 

line. Only your home/office phone should connect to the PhoneLynx.

4.  When the unit is first powered on, the transmitter will beep twice and both  

buttons will be illuminated in red.

  Keep away from 2.4 GHZ wireless home phones to avoid potential 

interference. Keep a reasonable distance between the base and PhoneLynx.

5.  Hold in either one of the buttons for three seconds. The LED for that button will 

begin to blink with a blue light once per second. This indicates the PhoneLynx 

is waiting to pair with your cell phone via Bluetooth

 wireless technology.

6.  Search for a new Bluetooth-enabled device on your cell phone.

7.  When your cell phone finds the device, it will read “PhoneLynx BT215-1” or 

“PhoneLynx BT215-2,” depending on what button was pushed.

8.  When prompted for a password on your cell phone, enter “

0000

” in the 

password field.

9.  When your cell phone is paired, the PhoneLynx will beep twice and the blue 

LED will slowly blink once every four seconds. The system is now ready.
NOTE:

 To add another cell phone, push the other button and repeat the 

pairing procedure.

10. Make and receive calls on your home/office phone just as you normally would. 

You will hear a dial tone provided by the PhoneLynx when picking up the receiver.