Cobra Electronics Corporation 5210 Manual De Usuario
01 August 2016
Page 10
Basic Camera Functions
Installing the Micro SD Card
To insert the SD card
Find the Micro SD card slot
Insert the card into the slot (make sure the card is facing the
Insert the card into the slot (make sure the card is facing the
correct way)
Push the card into the slot until it clicks
**Note – Please use a minimum speed Class 10 card, maximum 32GB
storage capacity. Cobra recommends a name brand card such as
Lexar®, SanDisk®, Kingston® or Gigastone.
storage capacity. Cobra recommends a name brand card such as
Lexar®, SanDisk®, Kingston® or Gigastone.
Follow these steps in reverse order to remove the SD card
**Note - Please ensure that the SD Card is inserted in the correct
direction or you may damage the SD card and/or SD card reader.
**Note - Please ensure that the SD Card is inserted in the correct
direction or you may damage the SD card and/or SD card reader.
Battery
Use only the type of battery that came with the camera.
Using any other type of
battery may damage the equipment and invalidate the
warranty.
Using any other type of
battery may damage the equipment and invalidate the
warranty.
Do not short the battery terminals. The battery could overheat.
Do not attempt to split or peel the outer casing.
Remove the battery if the camera is not going to be used for
a long time. If the battery is left unused for more than 3
months, charge the battery before use.
a long time. If the battery is left unused for more than 3
months, charge the battery before use.
1.
Installing and Removing Batteries
a. Press on battery cap to open it
b. Correctly install the battery into the camera as directed by
b. Correctly install the battery into the camera as directed by
the +/- symbols
c. Remove Battery: Open the battery cap to take the battery
out