Cobra Electronics Corporation 9820WR Manual De Usuario

User Manual

Remote Control

WASPcam 9820WR

NOTE**: Before pairing the remote to the camera, format the MicroSD card in the camera.

How To Pair the Remote:

1. When the camera is in standby mode, press the menu button twice to enter

system settings.

2. Press the left/right arrow buttons to scroll through the menu, choose remote

control to enter the remote menu. Then select Remote Match.

3. A message will appear on the LCD Screen “Wait Remote Match”, the camera is

now in pairing mode.

4. At the same time, press both buttons on the remote controller to start

pairing. Pairing is successful when the LCD screen shows “Remote Match
OK”

1 - Indicator light

2 – Photo Button - press to take photos,

Press the Inquiry/Record Button (3) and the Photo

button (2) simultaneously to enter Pairing mode

3 – Inquiry/Record Button – press to start/stop

recording, press and hold for 3 seconds to check

the present status of the camera (see below)

Remote Control Indicator Light Status

Status/LED

Red LED Light

Blue LED Light

Standby

1 time/sec frequently
Flickers about 5sec

Off

Recording

Off

Light on 3 seconds, then off

Status Inquiry

Power off

Light on 3 secs, then off

Off

Pairing

Long light

Success

Light on 3 secs, then off

Pairing Mode

Failure

Off