Cobra Electronics Corporation PR245 Manual De Usuario
Operation
English
Mode Functions
8
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To Scan Channels:
1. Press the Mode/Power button until the
1. Press the Mode/Power button until the
Scan icon and the channel numbers flash
on the display.
on the display.
2. Press the Channel Up or Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
codes while scanning channels.
The Scan icon will continue to be displayed
when scan is On. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for ten (10) seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to Standby mode
on the channel or channel/privacy code
displayed before you entered mode functions.
when scan is On. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for ten (10) seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to Standby mode
on the channel or channel/privacy code
displayed before you entered mode functions.
Mode/Power Button
Channel Button
Scan Channels
Customer Assistance
Warranty
Introduction
Operation
9
Nothing comes close to a Cobra
®
During Channel Scan (while receiving an incoming transmission),
You Can Choose From The Following:
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on
that channel. Your radio will remain on that channel
and return to Standby mode.
and return to Standby mode.
b. Press the Channel Up or Channel Down button to
resume scanning channels.
If you press the Talk button while scanning and not within
ten (10) seconds of receiving a transmission, you will transmit
on the channel on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning channels.
During Channel Scan (while not receiving a transmission),
You Can Choose From The Following:
ten (10) seconds of receiving a transmission, you will transmit
on the channel on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning channels.
During Channel Scan (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the
channel or channel/privacy code that was displayed before
you entered mode functions or the channel on which,
during scanning, you last received a transmission.
This will return the radio to Standby mode.
you entered mode functions or the channel on which,
during scanning, you last received a transmission.
This will return the radio to Standby mode.
b. Press the Mode/Power button to proceed to set privacy
code scan on the channel that was either displayed before
you entered mode functions or on which, during channel
scanning, you last received a transmission (see page 10
for further details).
you entered mode functions or on which, during channel
scanning, you last received a transmission (see page 10
for further details).
c. Press the Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last received a transmission.
mode functions or the channel on which, during scanning,
you last received a transmission.
Job: 245.qxd -- Color: Composite -- Signature 1, Sheet 4, Back -- Plate 8