Cobra Electronics Corporation SPX900 Manual De Usuario

Nothing Comes Close to a Cobra

®

  Place the detector on the dashboard to find a location  

where the unit has a clear, level view of the road.  

The angle can NOT be adjusted after mounting.

2.   Remove the paper backing 

from one side of the hook-

and-loop fastener.

3.  Attach the pad to the 

dashboard at your chosen 

location and remove the  

other paper backing.

4.  Attach the detector to the 

hook-and-loop fastener.  

You can remove and 

reattach the unit as  

often as you like.

5.  Plug the power cord  

into the detector.

6.  Plug the cigarette lighter 

adapter on the power  

cord into your vehicle’s 

cigarette lighter.

Rotate the On-Off/ 

Volume control  

clockwise (away  

from you).

Three beeps

Testing, then  

three beeps 
System Ready, then
Voice Alert

 appears in the 

display indicating 

that the power  

is On

Rotate clockwise  

(away from you)

 NOTE 

In some vehicles, power is supplied to the cigarette lighter even while the ignition  

is Off. If this is the case with your vehicle, you should turn Off or unplug your 

detector when parking for lengthy periods.

The Auxiliary Audio Jack can be used to connect external speakers in 

environments with high ambient noise levels. The internal speaker will  

be disconnected. (This uses a mini stereo audio connector.)