Cobra Electronics Corporation SPX955A Manual De Usuario

Nothing Comes Close to a Cobra

®

The tables on the following pages show you the types of 

Signals your detector 

will detect, as well as the voice and visual alerts it provides for each of them.
In 

Voice Alert mode you will first hear several tones, then a voice message 

announcing the type of signal detected, followed by more tones. In 

Tone Alert 

mode, you will hear the tones only.
In both Voice Alert and Tone Alert modes, a distinctly different alert tone is used 

for each type of signal detected (including separate tones for each laser signal). 

For X, K, and Ka band radar signals, the tones will repeat faster as  

you approach the signal source. The repeat rate of the tones gives you useful 

information about the signal detected. (See responding to alerts on page 18.)
   An indication of the type of signal detected will appear in the UltraBright  

data 

Display. During X, K, and Ka alerts, a number will also appear,  

indicating the strength of the signal detected. (1 = weakest, 5 = strongest)

  

The detector allows you to choose whether it will show 

bands. The factory settings are: X Band and K Band On.

To Turn K Band On and Off
While no signal is  

being detected, 

press and hold both 

the 

Mute and City 

buttons for four 

seconds.

K On = Two beeps

 

K will blink twice  

in the display

K will blink once  

in the display

K Off = One beep

To Turn X Band On and Off
While no signal is 

being detected, press 

and hold both the 

Dim 

and 

Mute buttons for 

four seconds.

X On = Two beeps

X will blink twice  

in the display

X will blink once  

in the display

X Off = One beep

While no signal

is being detected,

press and hold  

the

 Dim and iMute 

buttons for

four seconds.

On = Two beeps

 

S Flashes Two Times

 

Off = One beep

S Flashes One Time

 

SPX955IVT_MANL.indd   14-15

1/5/18   3:46 PM