Cobra Electronics Corporation SPX955A Manual De Usuario

Press and release

Press and  

release

Nothing Comes Close to a Cobra

®

 You can choose from three settings for 

Brightness of the display.  

You can cycle through the settings by repeatedly pushing the 

Dim button.  

The factory setting is 

Bright.

 Setting your detector to 

City mode delays all X band audio alerts until  

the signal strength reaches Level 3. (A single beep will sound when the  

signal is first detected.) This will reduce false alerts while you are driving  

in, or near, urban areas where there are many sources for conflicting  

X band signals such as microwave towers and automatic door openers. 
 To change settings, follow the procedure listed below, which indicates  

what you will see and hear (either in Voice Alert or Tone Alert mode)  

as you complete each step. The factory setting is 

Highway mode.

Press and 

release 

Dim 

button

To Change From Highway Mode to City Mode
Press and release  

the 

City button.

One beep

c appears  

in the display

To Change From City Mode Back to Highway Mode
Press and release  

the 

City button again.

Two beeps

 appears  

in the display

To Change the Brightness to Dim
Press and release 

the 

Dim button once.

One beep

Display dims

To Change the Brightness to Dark
Press and release  

the 

Dim button  

again.

One beep

Display remains dim 

(no visual alerts will 

be seen)

To Change the Brightness to Bright
Press and release  

the 

Dim button a  

third time.

Two beeps

Display returns  

to full brightness

When changing the 

Settings on your detector, please keep in mind:

  

g

   Buttons can have multiple functions.

  

g

   Depending on your choice of Voice Alert or Tone Alert mode, you will  

hear either voice messages or tones confirming changes in settings. 

  

g

   All settings will be stored in memory when the power is  

turned Off and recalled when the power is turned back On.

SPX955IVT_MANL.indd   6-7

1/5/18   3:46 PM