Cobra Electronics Corporation XRS9730 Manual De Usuario

Comes Close to a Cobra

®

•

The tables on the following pages show you the types of Signals your 
detector will detect, as well as the visual alerts it provides for each of them.

A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band 
radar signals, the tones will repeat faster as you approach the signal 
source. The repeat rate of the tones gives you useful information about 
the signal detected. See responding to alerts on page 28.

An indication of the type of signal detected will appear in the DigiView Data
Display. During X, K, Ka and Ku alerts, you will also see from one to five
vertical bars, indicating the strength of the signal detected.

-

-

- -

-

-

- -

- - -

-

- -

- -

- - -

- - - -

-

-

_

- -

- - -

- - -

- - - -

- - - -

_

1

2

3

4

5

Press 
and hold
Select/Dim
button

You can set the default level for Dim mode (Dim, Dimmer or Dark) 
either in Program mode or directly using the Select/Dim button.

Press and hold the
Select/Dim button

One beep each time the
display cycles

Cycles — see chart above

Release the Select/Dim
button to select the
current display as
default.

None

Dim, Dimmer or Dark

In Program mode, 
go to Display Dim,
Dimmer or Dark.

Two beeps

One beep

One beep

Select/Dim Button
Press and hold